Hi, my name is Dave,

A place to introduce yourself, chat about anything and put forward suggestions.
Instructions on how to add your location and photographs.
Post Reply
diggerdave777
Posts: 13
Joined: 03 Oct 2021, 15:37
Location: United Kingdom

Hi, my name is Dave,

Post by diggerdave777 » 04 Oct 2021, 05:16

Thanks for accepting me onto your forum.
I have used a sightmark HD for sometime and recently purchased a 4k model. The instructions are brief to say the least. My question is although supplied with a usb lead what charger should I use, and can anyone suggest a battery pack to use to extend usable life

phoenix
BRUCE ALMIGHTY
Posts: 9550
Joined: 09 May 2012, 14:40
Location: Aberdeen

Re: Hi, my name is Dave,

Post by phoenix » 04 Oct 2021, 07:51

Dave, any charger that has a USB outlet can safely be used to charge the Wraith
Any powerbank with a USB outlet can be used as a power bank, but I'd be looking to use a good quality powerbank with a capacity of at least 10000mah

Cheers

Bruce
LAND ROVER - THE WORLD'S WORST 4X4 BY FAR

sauer
Posts: 503
Joined: 15 Nov 2012, 20:44
Location: Angus scotland

Re: Hi, my name is Dave,

Post by sauer » 04 Oct 2021, 08:11

As an add I would say before buying check the power bank output

I’ve some 10000ah ones with 2.4amp output but do NOT power my thermal or my heated waistcoat …. They start very briefly then go off


Look for power bank with 3amp output
Think one I have is 3.1 amp output


Paul

diggerdave777
Posts: 13
Joined: 03 Oct 2021, 15:37
Location: United Kingdom

Re: Hi, my name is Dave,

Post by diggerdave777 » 04 Oct 2021, 10:46

Thankyou, what make and model of power bank do you have, not all seem to give output

diggerdave777
Posts: 13
Joined: 03 Oct 2021, 15:37
Location: United Kingdom

Re: Hi, my name is Dave,

Post by diggerdave777 » 04 Oct 2021, 10:46

many thanks

sauer
Posts: 503
Joined: 15 Nov 2012, 20:44
Location: Angus scotland

Re: Hi, my name is Dave,

Post by sauer » 04 Oct 2021, 17:49

Mine was just a generic no name from Amazon but I bought one that would give output in specs / description


Paul

Post Reply