Angel eye dvr Language selection

Suitable cams for use as nv, with specs here too. Wiring help for cam viewfinders.
Post Reply
User avatar
Rufus
Posts: 16
Joined: 04 Feb 2014, 08:06
Location: South Africa

Angel eye dvr Language selection

Post by Rufus » 21 Jan 2015, 13:10

Hi
I have just unboxed my Angel eye Dvr unit for a pulsar 750 but the screen is all in Chinese. Does anyone know how to change it to English?

User avatar
MrNewbie
Posts: 295
Joined: 22 Dec 2012, 21:28
Location: Grafton, Ohio USA

Re: Angel eye dvr Language selection

Post by MrNewbie » 21 Jan 2015, 19:20

1) Plug the silly little camera/mic into the AVI/in jack.
2) Set the SWITCH (bottom left side to N)
3) Turn on power. You should see video on screen.
4)Hit the ESC button , scroll to bottom right side of screen to the little gear icon, use the << >> buttons.
5) Hit OK.
6)You now have 8 little boxes, that you can not read. (:
7) Using the same << >>, scroll to the 2nd one up on the bottom right.
8) Your done.

Between steps 4 and 5, every icon on the bottom has its own menu...every icon has a different menu. You hit ESC then scroll around..then say ok for every individual screen icon

Damn, I'm good.

How do I know this? Mine came in yesterday too!

Mine will not charge through the computer USB port.
So, if you are having problems battery wise, just use the charger that came with it.

It is a flakey little gadget, but it does record at 800x600 res...not bad for the price, but a PITA to figure out.



...........................................................................................................

User avatar
Rufus
Posts: 16
Joined: 04 Feb 2014, 08:06
Location: South Africa

Re: Angel eye dvr Language selection

Post by Rufus » 22 Jan 2015, 04:16

Thanks Bud

Got it sorted

Post Reply