Sony CCD-TR333E viewfinder help

Suitable cams for use as nv, with specs here too. Wiring help for cam viewfinders.
Bubble1974
Posts: 48
Joined: 22 Feb 2015, 14:02
Location: Whitford, Devon

Sony CCD-TR333E viewfinder help

Postby Bubble1974 » 06 May 2015, 21:32

Hi all

Been given one of the above and trying to get the viewfinder working.. It's a six wire plug one white and five grey. I cannot find any schematics for this anywhere. By chance does anyone have one of these viewfinders or the wiring diagram, or even better if anyone has used one successfully and can advise which is what.

It's a LCD colour viewfinder so it's a tad different and the LCD is slightly larger than the normal CRT VF, I'm wondering if the voltage will be higher because of this..

Bubble1974
Posts: 48
Joined: 22 Feb 2015, 14:02
Location: Whitford, Devon

Re: Sony CCD-TR333E viewfinder help

Postby Bubble1974 » 06 May 2015, 21:34

The connector is on board IV10 on this diagram

Image

Image
Image

Bubble1974
Posts: 48
Joined: 22 Feb 2015, 14:02
Location: Whitford, Devon

Re: Sony CCD-TR333E viewfinder help

Postby Bubble1974 » 07 May 2015, 08:24

Ok found a online service manual for it.

Basically it runs off of 5v and pins 1&3 (5v) and 2&4 (GND) need to be connected and then it runs :)

Image


Return to “Camcorder help room”

Who is online

Users browsing this forum: No registered users and 3 guests