Page 1 of 1

Sony CCD-TR333E viewfinder help

Posted: 06 May 2015, 21:32
by Bubble1974
Hi all

Been given one of the above and trying to get the viewfinder working.. It's a six wire plug one white and five grey. I cannot find any schematics for this anywhere. By chance does anyone have one of these viewfinders or the wiring diagram, or even better if anyone has used one successfully and can advise which is what.

It's a LCD colour viewfinder so it's a tad different and the LCD is slightly larger than the normal CRT VF, I'm wondering if the voltage will be higher because of this..

Re: Sony CCD-TR333E viewfinder help

Posted: 06 May 2015, 21:34
by Bubble1974
The connector is on board IV10 on this diagram

Image

Image
Image

Re: Sony CCD-TR333E viewfinder help

Posted: 07 May 2015, 08:24
by Bubble1974
Ok found a online service manual for it.

Basically it runs off of 5v and pins 1&3 (5v) and 2&4 (GND) need to be connected and then it runs :)

Image