Torch Problem

Flashlights, IR illuminators. Projects, reviews and queries. DIY 'stickies' here too.
mick.c
Posts: 50
Joined: 20 Jan 2012, 16:23
Location: Preston

Torch Problem

Postby mick.c » 28 Nov 2017, 21:43

Evening all...well was going to go out this evening for a quick look about until I noticed my 3 mode T20 is now a single mode T20...and stuck on low mode, I haven't dropped or banged it (that I Know of) now could it be the end cap where you slightly press to change modes or is it the pill it's self, its a Carls Customz zoomable....and I don't know how to get the head off to get to the pill...any help would be appreciated....cheers

Mick

magman
Posts: 62
Joined: 07 Jun 2014, 22:20
Location: Cheshire

Re: Torch Problem

Postby magman » 28 Nov 2017, 22:32

Have a look at this video but skip to about 7.53 it shows you how they come apart. I think circlip pliers would be a better tool for the job than what he uses in the video.

https://youtu.be/LR4EkkX9GS

magman
Posts: 62
Joined: 07 Jun 2014, 22:20
Location: Cheshire

Re: Torch Problem

Postby magman » 28 Nov 2017, 22:36

Sorry try this link

https://youtu.be/LR4EkkX9GSg

superslack
Posts: 62
Joined: 08 Feb 2016, 23:58
Location: Virginia

Re: Torch Problem

Postby superslack » 29 Nov 2017, 02:01

I use needle nose pliers to remove the lens retaining ring.

User avatar
some bloke
TRADER MEMBER
Posts: 7349
Joined: 27 Jan 2012, 16:14
Location: Cornwall or Leicester

Re: Torch Problem

Postby some bloke » 29 Nov 2017, 02:16

I'm beginning to think the Chinese three mode drivers are defaulting to single low or mid power. Had a couple of issues with this.
Image

mick.c
Posts: 50
Joined: 20 Jan 2012, 16:23
Location: Preston

Re: Torch Problem

Postby mick.c » 29 Nov 2017, 19:19

Thanks for all the replies.....is the drivers fixable Dave or do I get another and where from....cheers

Mick

User avatar
some bloke
TRADER MEMBER
Posts: 7349
Joined: 27 Jan 2012, 16:14
Location: Cornwall or Leicester

Re: Torch Problem

Postby some bloke » 30 Nov 2017, 01:20

mick.c wrote:Thanks for all the replies.....is the drivers fixable Dave or do I get another and where from....cheers

Mick


Best speak to Carl. 8-)
Image

mick.c
Posts: 50
Joined: 20 Jan 2012, 16:23
Location: Preston

Re: Torch Problem

Postby mick.c » 08 Dec 2017, 20:02

Right Carl has not replied to messages so who do I see for a new pill and what do people suggest.....cheers

Mick

User avatar
snoopy
Posts: 2588
Joined: 22 Jun 2012, 23:22
Location: NER NER LOL stoke on trent

Re: Torch Problem

Postby snoopy » 09 Dec 2017, 01:22

i've had the same thing a couple times, removed the batteries and replaced and they started cycling narmaly again... touch wood they stay that way.
'who is that masked man? its the kemosabby der..the bloody injun tells you every week!'

User avatar
sunndog
ADMINISTRATOR
Posts: 6341
Joined: 10 Jun 2012, 17:51
Location: buxton, derbyshire

Re: Torch Problem

Postby sunndog » 09 Dec 2017, 09:13

mick.c wrote:Thanks for all the replies.....is the drivers fixable Dave or do I get another and where from....cheers

Mick


Nightvision store is the place for a new pill. Either black sun 2 or ruby
oslon black drivers
viewtopic.php?f=35&t=2333

when asking for advice, please include what n.v device and/or illumination you already have (if any) and what rifles you intend to use them on...cheers


Return to “Illumination”

Who is online

Users browsing this forum: No registered users and 8 guests