Picatinney rail

For all pcp's and springers. Tuning, repairs, pellets, show and tell.
Post Reply
Cornish fixer
Posts: 191
Joined: 17 Apr 2014, 17:08
Location: Cornwall England

Picatinney rail

Post by Cornish fixer » 14 Jun 2018, 07:53

Hi guys son in laws thinking of trying nv on his air arms 510 fac and is looking at a pulsar n355 this requires a picatinney mount to fit on have any of you done this on the air arms rifles ?? Is it possible because of the pellet mag thanks in advance

Disco_GT3
Posts: 30
Joined: 24 Apr 2016, 23:12
Location: West Berkshire

Re: Picatinney rail

Post by Disco_GT3 » 14 Jun 2018, 12:38

You'd need to use some dovetail risers something like these https://www.ant-supplies.uk/rails-and-a ... rails.html I imagine to clear the mag, then a dovetail to pic converter of some kind such as https://www.ant-supplies.uk/rails-and-a ... pters.html

These might work and be a nicer solution, cant remember how much clearance you need on an AAs to clear the mag?
https://www.opticswarehouse.co.uk/produ ... t-adapter/
https://www.opticswarehouse.co.uk/produ ... ter-mount/

Should work, I imagine the height the N355 will be over the action would make the shooting position terrible without some kind of cheek/comb riser to compensate for the additional height...

Cornish fixer
Posts: 191
Joined: 17 Apr 2014, 17:08
Location: Cornwall England

Re: Picatinney rail

Post by Cornish fixer » 14 Jun 2018, 13:08

Thanks for your advice , I will pass it on :thumbup:

Post Reply