Page 1 of 1

repeatablle mounting xq50

Posted: 25 Mar 2018, 08:53
by JP1
Anyne tested the return to zero after removing and reattaching a trail xq50?

Thanks

John

Re: repeatablle mounting xq50

Posted: 25 Mar 2018, 11:58
by pav
I have mine set for 3 guns in the a.b.c in menu when I change guns there usualy a click or two out but only on airguns

Re: repeatablle mounting xq50

Posted: 25 Mar 2018, 12:44
by anthony
i have mine set on 4 guns a 223 / 17mr /22rf /22 Rapid and never had a problem

Re: repeatablle mounting xq50

Posted: 13 May 2018, 06:58
by spready
I’ve just got one of the pulsar qd locking mounts from the states at claims to return to zero, it certainly does do that, more than happy with it, it’s brilliant

Re: repeatablle mounting xq50

Posted: 14 May 2018, 20:35
by andy66
If your using the supplied mount get the pulsar 1nm torque wrench (about £15) to tighten the bolts also ensure you mount it in the same place each time pushing the scope lightly in the forward direction when tightening and you will have RTZ each time. I had a good test with mine on 3 rifles last weekend taking it on and off about 10 times between each shots and all were exactly in the same place.

Re: repeatablle mounting xq50

Posted: 15 May 2018, 08:00
by Mini Magnum
andy66 wrote:
14 May 2018, 20:35
If your using the supplied mount get the pulsar 1nm torque wrench (about £15) to tighten the bolts also ensure you mount it in the same place each time pushing the scope lightly in the forward direction when tightening and you will have RTZ each time. I had a good test with mine on 3 rifles last weekend taking it on and off about 10 times between each shots and all were exactly in the same place.
Agree great advice :thumbup:

Re: repeatablle mounting xq50

Posted: 15 May 2018, 12:26
by blueroll
So That Pulsar torque wrench is fixed at just under 9 inch pounds ?

Re: repeatablle mounting xq50

Posted: 15 May 2018, 17:06
by fizzbangwhallop
http://www.microglobe.co.uk/advanced_se ... sar+torque

Got one or two... works well with Clive’s thermal scopes... but I carry a thumb wrench as sold by Wilkos in my jacket for swapping scopes up a high seat.... dirt cheap, the socket was more!

https://www.wilko.com/search?q=Thumb+wrench

Cheers

Fizz