Steerable C mount E700 camera lens adaptors.

This is for members to sell, buy or swap goods.
Post Reply
User avatar
some bloke
TRADER MEMBER
Posts: 7644
Joined: 27 Jan 2012, 16:14
Location: Cornwall or Leicester

Steerable C mount E700 camera lens adaptors.

Post by some bloke » 03 Nov 2016, 16:13

New in are these Steerable C mount lens adaptors for spotter builders using CINE TV lenses.

These are broadly similar to the older type shown here with these fitting instructions - apart from they are now supplied with screws slightly further apart so they can be 'AIMED' with the E700 camera fitted in position, a longer 'neck' and a thin O-ring round the neck:
http://nightvisionforumuk.com/viewtopic ... ors#p92030

They can still be fitted flush to a panel/box without the O-ring, or:

If used with the O-ring on the neck they can be screwed up to the O-ring - then further tighten a chosen screw(s) to tilt the camera and lens towards a floppy head torch IR beam centre with a slight pivot action afforded by compressing one side of the O-ring. That of course leaves a slightly uneven gap around the edges of the lens mount that can be filled with silicone sealant but the O-ring seals the joint. The raised fixing bracket lugs on the sides of the camera may need to be filed down a little to allow the hex driver to engage the aim adjusting screws.

The ORIGINAL E700 specific camera's need their neck cropping by about half - then use the remaining part of the neck as an alignment guide to tack the camera body to the rear of the adaptor and inside of the box using silicone adhesive or glue.
E700 CAMERAS WITH 12 MM LENSES HAVE SHORTER NECKS THAT SHOULD NOT REQUIRE FURTHER SHORTENING TO USE THESE ADAPTORS FOR SPOTTER BUILDS.


Image

Image


Price is £18 collected or add £7 for RMSD to UK postcodes.
Last edited by some bloke on 18 Apr 2018, 01:36, edited 6 times in total.
Image

magman
Posts: 65
Joined: 07 Jun 2014, 22:20
Location: Cheshire

Re: Steerable C mount E700 camera lens adaptors.

Post by magman » 11 Nov 2016, 08:18

I'll take one of those. If you could pm me the payment details that would be great.

User avatar
some bloke
TRADER MEMBER
Posts: 7644
Joined: 27 Jan 2012, 16:14
Location: Cornwall or Leicester

Re: Steerable C mount E700 camera lens adaptors.

Post by some bloke » 23 Feb 2017, 17:03

I can't recall who is who is waiting for these but they are now back in stock.
Image

pete65
Posts: 19
Joined: 19 Jan 2017, 15:11
Location: Southampton

Re: Steerable C mount E700 camera lens adaptors.

Post by pete65 » 27 Feb 2017, 10:33

I'll take on please if you pm me the details. Cheers


Sent from my iPhone using Tapatalk

koiman97
Posts: 291
Joined: 23 Oct 2012, 21:13
Location: Oldham manchester

Re: Steerable C mount E700 camera lens adaptors.

Post by koiman97 » 13 Jun 2017, 01:06

Hi can you pm me detaisl for payment for a adapter plz
Chris riley

User avatar
some bloke
TRADER MEMBER
Posts: 7644
Joined: 27 Jan 2012, 16:14
Location: Cornwall or Leicester

Re: Steerable C mount E700 camera lens adaptors.

Post by some bloke » 07 Dec 2017, 04:46

I have another small batch of these in stock.
Image

danny50
Posts: 13
Joined: 13 Jan 2013, 21:47
Location: norfolk

Re: Steerable C mount E700 camera lens adaptors.

Post by danny50 » 07 Dec 2017, 20:44

Hi some like,can I purchase one of these adaptors please and could I possibly have fitting instructions via pm as this is my first build

User avatar
some bloke
TRADER MEMBER
Posts: 7644
Joined: 27 Jan 2012, 16:14
Location: Cornwall or Leicester

Re: Steerable C mount E700 camera lens adaptors.

Post by some bloke » 07 Dec 2017, 22:33

danny50 wrote:Hi some bloke, can I purchase one of these adaptors please and could I possibly have fitting instructions via pm as this is my first build
Hiya danny, PM replied to and I have been editing the fitting instruction thread here;

http://nightvisionforumuk.com/viewtopic ... 030#p92030
Image

User avatar
some bloke
TRADER MEMBER
Posts: 7644
Joined: 27 Jan 2012, 16:14
Location: Cornwall or Leicester

Re: Steerable C mount E700 camera lens adaptors.

Post by some bloke » 11 Jan 2018, 17:44

Seems new 12mm lens equipped E700's have shorter necks that will not need cropping - which makes DIY fitting these adaptors a lot easier for those not equipped to shorten the longer metal neck used for 16mm lens spec - the lenses themselves are not generally used for spotters.

Image

Image
Image

Post Reply