Page 1 of 1
Cz527 picatinny rail wanted
Posted: 21 Apr 2021, 07:00
by dknowles
Hi all , looking for a picatinny base for cz527 , must be at least 140mm to fit the wraith extended mount
Re: Cz527 picatinny rail wanted
Posted: 21 Apr 2021, 07:37
by fizzbangwhallop
One (or two) of AntSupplies expanding adapters may the way to go.....
https://www.ant-supplies.uk/rails-and-a ... pters.html
I use one of the long ones to get my Pard8 onto my AA S510 air rifle’s dovetail, it aligned better having the expansion gap on the right.
I already had a pair of the short, single slot, ones but I wasn’t convinced the measurement between the slot and the edge is the same as the slot to slot measurement of the longer one as the Pard’s arrestor block didn’t sit quite flat in there.
Cheers,
Fizz
Re: Cz527 picatinny rail wanted
Posted: 21 Apr 2021, 07:42
by dknowles
fizzbangwhallop wrote: ↑21 Apr 2021, 07:37
One (or two) of AntSupplies expanding adapters may the way to go.....
https://www.ant-supplies.uk/rails-and-a ... pters.html
I use one of the long ones to get my Pard8 onto my AA S510 air rifle’s dovetail, it aligned better having the expansion gap on the right.
I already had a pair of the short, single slot, ones but I wasn’t convinced the measurement between the slot and the edge is the same as the slot to slot measurement of the longer one as the Pard’s arrestor block didn’t sit quite flat in there.
Cheers,
Fizz
Cheers fizz , the ones I can see aren't long enough? This gun seems a nightmare to get the rails for as most are 100-130mm
Re: Cz527 picatinny rail wanted
Posted: 21 Apr 2021, 08:09
by phoenix
The spring loaded clip in picatinny adaptors won't work in a CZ527 because it has 15mm dovetails
This will do the job
https://www.tacticalscope.co.uk/britann ... 6738-p.asp
As a CZ527 owner, I feel your pain!
Cheers
Bruce
Re: Cz527 picatinny rail wanted
Posted: 21 Apr 2021, 08:22
by dknowles
Cheers Bruce , its a pain in the arse and they seem to be double the price of other rifles, for the wraith mount do you know the absolute minimum rail I can get , mm sporting have a standard which is 134mm?
Re: Cz527 picatinny rail wanted
Posted: 21 Apr 2021, 09:13
by phoenix
Agreed, rails for the CZ527 are expensive.
I use a Contessa on mine but I honestly don't know if it's long enough to work with the Wraith extended mount.
Cheers
Bruce
Re: Cz527 picatinny rail wanted
Posted: 21 Apr 2021, 09:25
by dknowles
phoenix wrote: ↑21 Apr 2021, 09:13
Agreed, rails for the CZ527 are expensive.
I use a Contessa on mine but I honestly don't know if it's long enough to work with the Wraith extended mount.
Cheers
Bruce
Funnily enough I was just about to buy the same rail from someone , but it's 129mm and I think it's gonna be about 10mm short
Re: Cz527 picatinny rail wanted
Posted: 21 Apr 2021, 14:14
by B&W FOX
As I said on SD.
Get a pair of RB4 Sportsmatch CZ to 11mm dovetail blocks £27 and an extended 11mm to Weaver rail that is 260mm long on a 200mm base £18 all from Ant Supplies, job done.
I use one on my Trail 2 thermal and it repeats zero everytime.
You can swap it for forward or rearward overhang
Re: Cz527 picatinny rail wanted
Posted: 21 Apr 2021, 18:52
by dknowles
B&W FOX wrote: ↑21 Apr 2021, 14:14
As I said on SD.
Get a pair of RB4 Sportsmatch CZ to 11mm dovetail blocks £27 and an extended 11mm to Weaver rail that is 260mm long on a 200mm base £18 all from Ant Supplies, job done.
I use one on my Trail 2 thermal and it repeats zero everytime.
You can swap it for forward or rearward overhang
Thanks mate , I have ordered one from Scott country that assures me will fit the extended mount but if not that'll be my plan
