Page 1 of 1
Scope screws needed to replace ones on my rimfire scope
Posted: 10 Jun 2014, 15:44
by Hutchey
Hi, I had some trouble removing the Allen key headed bolts as they had seized in place so I had to drill the allen bit off the top them I could get them off the rifle and managed to unwind the threaded end ok.
Trouble is I can't seem to find details on the size and length of any replacement options.
Anyone able to help me out at all please?
Cheers
Re: Scope screws needed to replace ones on my rimfire scope
Posted: 10 Jun 2014, 15:50
by PESCA
There are quite a few different sizes used.
George
Re: Scope screws needed to replace ones on my rimfire scope
Posted: 10 Jun 2014, 16:09
by some bloke
Most are M4 thread so M4x14 is worth a try first if you have to buy any.
Re: Scope screws needed to replace ones on my rimfire scope
Posted: 11 Jun 2014, 12:36
by Hutchey
think mine might be 35mm long
Re: Scope screws needed to replace ones on my rimfire scope
Posted: 11 Jun 2014, 12:55
by fizzbangwhallop
This lot are very good...... once you've an idea of what you need
http://www.modelfixings.co.uk/index2.htm
Cheers
Fizz
Re: Scope screws needed to replace ones on my rimfire scope
Posted: 11 Jun 2014, 12:58
by Hutchey
sorry, got distracted by your avatar
thanks, will have a nose at the link
Re: Scope screws needed to replace ones on my rimfire scope
Posted: 11 Jun 2014, 12:59
by fizzbangwhallop
Hutchey wrote:sorry, got distracted by your avatar
thanks, will have a nose at the link
You're not the only one............I'd like to nose the link too
fizz