Page 1 of 1

Re: Another SB No-Scope rifle Scope *SOLD*

Posted: 02 Nov 2014, 22:42
by some bloke
Another No-Scope rifle sight with an EJ230 camera inside. Three grubscrews are now fitted in the outer c mount tube to aid matching the POA to the POI with a central crosshair.

Image

Image

https://www.youtube.com/watch?v=4Ky0SnK ... -OWKFJadkw

These monitor equipped devices are the only devices that do not cause me any eye-sting. :angel:

It can be used in a head up position - or a head down cheek weld position with the monitor about 10 inches from the eye, an earlier version is shown in this photo:
Image


This has an RCA out socket for DVR recordings and runs on two 18650 rechargeable batteries (not supplied) or 4 CR123 batteries ( I have not tried rechargeable ones). Batteries are accessed by removing the monitor which is connected via an (umbilical?) Servo cable:
Image
Image

This is how the monitor is fitted and removed:
https://www.youtube.com/watch?v=IliQEYh ... -OWKFJadkw


At typical subsonic range it rarely requires an illuminator to be used to spot then stalk up to your rabbits and sometimes even take the shot: Though there will be periods of very dark when an IR has to be used - and periods when you can see several hundred yards without an IR.

Few NV users using add-on rigs can imagine the covert capabilities of this rig at subsonic ranges without spending several hundred pounds.
You can expect this sort of advantage on a foggy night for example:
https://www.youtube.com/watch?v=t6nPsp8 ... -OWKFJadkw

And this performance in good moonlight conditions:
https://www.youtube.com/watch?v=VMrHaSI ... -OWKFJadkw

Both lens options are pre - owned.
Price is £330 with the 50mm lens and M42 adaptor. (About 3.5 to 4 mag)
Or £430 with the Cosmicar 75mm F1.4 TV lens - which has a dent on it. (about 5.5 to 6 mag)

Any of the illuminators in my signature picture can be included with a scope mount for £40 if taken at the same time.

I'm slightly dyslexic so please expect to see a few edits if I notice I missed something.

Re: Another SB No-Scope rifle Scope

Posted: 03 Nov 2014, 12:15
by igors2255
Hello,

I liked your design. There is enough room inside for the OSD PCB, which inserts a crosshair in the video signal. The photo shows part of the crosshairs. Total of 16 pieces, moreover, you can invert the image crosshairs (white or black). The board works with both PAL and NTSC systems.

http://postimg.org/gallery/21ehvn9jg/
http://postimg.org/gallery/1mv8wgcuk

Crosshair can be moved using the 5 buttons and memorize the position and a crosshairs form in 4 memory.


Regards,
Igors2255

Re: Another SB No-Scope rifle Scope

Posted: 06 Nov 2014, 13:43
by some bloke
This is available with an alternative 75mm F1.4 unbranded TV lens at the £430 price - which TECSEC brand as an F 1.3 lens.

Re: Another SB No-Scope rifle Scope

Posted: 06 Nov 2014, 14:13
by punky
igors2255 wrote:Hello,

I liked your design. There is enough room inside for the OSD PCB, which inserts a crosshair in the video signal. The photo shows part of the crosshairs. Total of 16 pieces, moreover, you can invert the image crosshairs (white or black). The board works with both PAL and NTSC systems.

http://postimg.org/gallery/21ehvn9jg/
http://postimg.org/gallery/1mv8wgcuk

Crosshair can be moved using the 5 buttons and memorize the position and a crosshairs form in 4 memory.


Regards,
Igors2255
Hi Igor I think someblokes missed what you asked here somwhat :crazy: Dave give him the diamentions of the box m8 :lol:

Re: Another SB No-Scope rifle Scope

Posted: 06 Nov 2014, 19:52
by some bloke
punky wrote:
igors2255 wrote:Hello,

I liked your design. There is enough room inside for the OSD PCB, which inserts a crosshair in the video signal. The photo shows part of the crosshairs. Total of 16 pieces, moreover, you can invert the image crosshairs (white or black). The board works with both PAL and NTSC systems.

http://postimg.org/gallery/21ehvn9jg/
http://postimg.org/gallery/1mv8wgcuk

Crosshair can be moved using the 5 buttons and memorize the position and a crosshairs form in 4 memory.


Regards,
Igors2255
Hi Igor I think someblokes missed what you asked here somwhat :crazy: Dave give him the diamentions of the box m8 :lol:

Eh? Hmm OK, I think he's saying his Crosshair generator fits my pods, maybe for other types of build or camera - rather than asking if it will. But just in case you are seeing something I can't here is a better idea of the scale. :thumbup:

Image

Re: Another SB No-Scope rifle Scope

Posted: 06 Nov 2014, 20:39
by igors2255
more info about PCB dimension and connection, but of course you all know better

http://postimg.org/image/5e04ii66z/
http://postimg.org/image/ao539sqfv/

Re: Another SB No-Scope rifle Scope - SOLD

Posted: 13 Nov 2014, 04:06
by some bloke
Sold. :thumbup:

I have more 75mm TV lenses now and can take orders for a five day turnaround.