Pard NV008P and NV008PLRF in stock

[cliveward]

Hi All,

We have the Pard NV008P and NV008P LRF day / night vision rifle scopes in stock with or without built in laser range finder. Both are the latest models with higher resolution OLED display and increased features, such as compass, level, clinometer and PIP function:

http://www.nightvisionstore.co.uk/pard- ... 2x32519467

http://www.nightvisionstore.co.uk/pard- ... 2x32519595

These are the proper 'official' UK models sourced from the approved UK importer so they fully conform to safety regulations and have proper 2 year UK warranty and back up. It's worth mentioning because some sellers on Ebay, FB and even on here are selling what are described as UK models, when they are in fact grey imported Chinese/Global market units. The easiest test is to look at the serial number. The official UK model will be engraved with a serial number starting in 4 digits, followed by UK.

If you want easier switching between rifles without the need for a torque wrench then we also stock the Rusan QR mount:

http://www.nightvisionstore.co.uk/rusan ... 2x32642840


Cheers





Clive

[Bob57]

Hi All,

We have the Pard NV008P and NV008P LRF day / night vision rifle scopes in stock with or without built in laser range finder. Both are the latest models with higher resolution OLED display and increased features, such as compass, level, clinometer and PIP function:

http://www.nightvisionstore.co.uk/pard- ... 2x32519467

http://www.nightvisionstore.co.uk/pard- ... 2x32519595

These are the proper 'official' UK models sourced from the approved UK importer so they fully conform to safety regulations and have proper 2 year UK warranty and back up. It's worth mentioning because some sellers on Ebay, FB and even on here are selling what are described as UK models, when they are in fact grey imported Chinese/Global market units. The easiest test is to look at the serial number. The official UK model will be engraved with a serial number starting in 4 digits, followed by UK.

If you want easier switching between rifles without the need for a torque wrench then we also stock the Rusan QR mount:

http://www.nightvisionstore.co.uk/rusan ... 2x32642840


Cheers





Clive

Hi Clive,
Can you tell me please if the pard 008 sits lower on a picatiny rail with the rusan mount, as opposed to the standard mount the 008 comes with ??

[cliveward]

Hi All,

We have the Pard NV008P and NV008P LRF day / night vision rifle scopes in stock with or without built in laser range finder. Both are the latest models with higher resolution OLED display and increased features, such as compass, level, clinometer and PIP function:

http://www.nightvisionstore.co.uk/pard- ... 2x32519467

http://www.nightvisionstore.co.uk/pard- ... 2x32519595

These are the proper 'official' UK models sourced from the approved UK importer so they fully conform to safety regulations and have proper 2 year UK warranty and back up. It's worth mentioning because some sellers on Ebay, FB and even on here are selling what are described as UK models, when they are in fact grey imported Chinese/Global market units. The easiest test is to look at the serial number. The official UK model will be engraved with a serial number starting in 4 digits, followed by UK.

If you want easier switching between rifles without the need for a torque wrench then we also stock the Rusan QR mount:

http://www.nightvisionstore.co.uk/rusan ... 2x32642840


Cheers





Clive

Hi Clive,
Can you tell me please if the pard 008 sits lower on a picatiny rail with the rusan mount, as opposed to the standard mount the 008 comes with ??

Hi Bob,

I know the Pard mount has changed a few times, but the Rusan measures 21mm from the top of your rifles picatinny rail to the main underside of the Pards body (not the bit that protrudes for the mount).


Cheers





Clive

[Bob57]

Hi All,

We have the Pard NV008P and NV008P LRF day / night vision rifle scopes in stock with or without built in laser range finder. Both are the latest models with higher resolution OLED display and increased features, such as compass, level, clinometer and PIP function:

http://www.nightvisionstore.co.uk/pard- ... 2x32519467

http://www.nightvisionstore.co.uk/pard- ... 2x32519595

These are the proper 'official' UK models sourced from the approved UK importer so they fully conform to safety regulations and have proper 2 year UK warranty and back up. It's worth mentioning because some sellers on Ebay, FB and even on here are selling what are described as UK models, when they are in fact grey imported Chinese/Global market units. The easiest test is to look at the serial number. The official UK model will be engraved with a serial number starting in 4 digits, followed by UK.

If you want easier switching between rifles without the need for a torque wrench then we also stock the Rusan QR mount:

http://www.nightvisionstore.co.uk/rusan ... 2x32642840


Cheers





Clive

Hi Clive,
Can you tell me please if the pard 008 sits lower on a picatiny rail with the rusan mount, as opposed to the standard mount the 008 comes with ??

Hi Bob,

I know the Pard mount has changed a few times, but the Rusan measures 21mm from the top of your rifles picatinny rail to the main underside of the Pards body (not the bit that protrudes for the mount).


Cheers




Clive

Thanks for that Clive, that's a bugger my 008 measures 13mm top of pic to underside of body, I was hoping it might have been about the same or lower

[cliveward]

Hi Clive,
Can you tell me please if the pard 008 sits lower on a picatiny rail with the rusan mount, as opposed to the standard mount the 008 comes with ??

Hi Bob,

I know the Pard mount has changed a few times, but the Rusan measures 21mm from the top of your rifles picatinny rail to the main underside of the Pards body (not the bit that protrudes for the mount).


Cheers




Clive

Thanks for that Clive, that's a bugger my 008 measures 13mm top of pic to underside of body, I was hoping it might have been about the same or lower

Hi Bob,

Just measured the latest factory Pard mount along side the Rusan and we must have been measuring from different places. Anyway the Rusan mount is 1mm higher than the current Pard factory mount.


Cheers





Clive

[Bob57]

Thanks for that Clive, that's a bugger my 008 measures 13mm top of pic to underside of body, I was hoping it might have been about the same or lower
[/quote]

Hi Bob,

Just measured the latest factory Pard mount along side the Rusan and we must have been measuring from different places. Anyway the Rusan mount is 1mm higher than the current Pard factory mount.


Cheers





Clive
[/quote]

That sounds better, thanks clive